MSI Wind Board D510: instruction

i

Wind Board

D510/ D410 series

MS-7618 (v1.x) Mainboard

G52-76181X2

ii

▍

Preface

Copyright Notice

The material in this document is the intellectual property of

MICRO-STAR INTERNA-

TIONAL. We take every care in the preparation of this document, but no guarantee is

given as to the correctness of its contents. Our products are under continual improve-

ment and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

®

MSI

is registered trademark of Micro-Star Int’l Co.,Ltd.

®

NVIDIA

is registered trademark of NVIDIA Corporation.

®

ATI

is registered trademark of ATI Technologies, Inc.

®

AMD

is registered trademarks of AMD Corporation.

®

Intel

is registered trademarks of Intel Corporation.

®

Windows

is registered trademarks of Microsoft Corporation.

®

AMI

is registered trademark of American Megatrends Inc.

®

Award

is a registered trademark of Phoenix Technologies Ltd.

®

Sound Blaster

is registered trademark of Creative Technology Ltd.

®

Realtek

is registered trademark of Realtek Semiconductor Corporation.

®

JMicron

is registered trademark of JMicron Technology Corporation.

®

Netware

is a registered trademark of Novell, Inc.

Revision History

Revision

Revision History

Date

V1.0 First release for PCB 1.x February 2010

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively, please

try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,

and other information:

http://www.msi.com/index.php?func=service

Contact our technical staff at:

http://ocss.msi.com

￭

￭

￭

￭

￭

￭

￭

￭

￭

￭

￭

￭

◙

◙

iii

MS-7618

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable fl at surface before setting it up.

The openings on the enclosure are for air convection hence protects the equipment

from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V before

connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not place any-

thing over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause electrical

shock.

If any of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moist ure.

The equipment does not work well or you can not get it work according to User’s

Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,

0

0

STORAGE TEMPERATURE ABOVE 60

C (140

F), IT MAY DAMAGE THE EQUIP-

MENT.

￭

￭

￭

￭

￭

￭

￭

￭

￭

￭

￭

◯

◯

◯

◯

◯

◯

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

廢電池請回收

For better environmental protection, waste batteries should be

collected separately for recycling special disposal.

iv

▍

Preface

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found

to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below.

◯

Reorient or relocate the receiving antenna.

◯

Increase the separation between the equipment and receiver.

◯

Connect the equipment into an outlet on a circuit diff erent from that to which the

receiver is connected.

◯

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifi cations not expressly approved by the party responsible for com-

pliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply

with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7618

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions:

1)

this device may not cause harmful interference, and

2)

this device must accept any interference received, including interference that may

cause undesired operation.

v

MS-7618

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must

remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Elec-

tronic Equipment, Directive 2002/96/EC, which takes eff ect on August 13,

2005, products of “electrical and electronic equipment” cannot be discarded

as municipal waste anymore and manufacturers of covered electronic equip-

ment will be obligated to take back such products at the end of their useful life. MSI will

comply with the product take back requirements at the end of life of MSI-branded prod-

ucts that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elek-

tro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI

hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in

die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus

zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt aus-

schliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et afi n de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement élec-

triques et électroniques, directive 2002/96/EC, prenant eff et le 13 août 2005, que les

produits électriques et électroniques ne peuvent être déposés dans les décharges ou

tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de

récupérer certains produits en fi n de vie. MSI prendra en compte cette exigence relative

au retour des produits en fi n de vie au sein de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

vi

▍

Preface

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equi-

pos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos

clasifi cados como “eléctricos y equipos electrónicos” no pueden ser depositados en

los contenedores habituales de su municipio, los fabricantes de equipos electrónicos,

están obligados a hacerse cargo de dichos productos al termino de su período de vida.

MSI estará comprometido con los términos de recogida de sus productos vendidos en

la Unión Europea al fi nal de su periodo de vida. Usted debe depositar estos productos

en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una

empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische

en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kun-

nen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten

worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.

MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI

dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op

lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj

sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Di-

rektiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju

pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i

proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog

uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda

kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proiz-

vode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako fi rma dbająca o ekologię, MSI przy-

pomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektry-

cznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia

2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być trak-

towane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani

do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni

wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wy-

cofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach

zbiorczych.

vii

MS-7618

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC

Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli

ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların

üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü

olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI

ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama

noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků

2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické

výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se

tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení je-

jich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI,

prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat

v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve

az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elek-

tronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos

és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az

ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavé-

telére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapc-

solatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek

esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre

viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici

ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti

alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come

rifi uti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto

alla fi ne del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti

marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fi ne del loro

ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

viii

▍

Preface

CONTENTS

Copyright Notice

............................................................................................

i

i

Trademarks

....................................................................................................

i

i

Revision History

.............................................................................................

i

i

Technical Support

..........................................................................................

i

i

Safety Instructions

.........................................................................................

ii

i

FCC-B Radio Frequency Interference Statement

..........................................

i

v

WEEE (Waste Electrical and Electronic Equipment) Statement

....................

v

English

......................................................................................................

En-

1

Mainboard Specifi cations ...................................................................................En-2

Quick Components Guide ..................................................................................En-4

Memory ..............................................................................................................En-5

Power Supply .....................................................................................................En-7

Back Panel .........................................................................................................En-8

Connectors .........................................................................................................En-9

Jumpers ...........................................................................................................En-14

Slots .................................................................................................................En-15

BIOS Setup ......................................................................................................En-16

Software Information ........................................................................................En-24

Deutsch

....................................................................................................

De-

▍

1

Spezifi cationen .................................................................................................. De-2

Komponenten-Übersicht ................................................................................... De-4

Speicher ............................................................................................................ De-5

Stromversorgung ............................................................................................... De-7

Rücktafel ........................................................................................................... De-8

Anschlüssen ...................................................................................................... De-9

Jumpers .......................................................................................................... De-14

Steckplätze ...................................................................................................... De-15

BIOS Setup ..................................................................................................... De-16

Software-Information ....................................................................................... De-24

ix

MS-7618

Français

.....................................................................................................

Fr-

1

Spécifi cations ......................................................................................................Fr-2

Guide Rapide Des Composants ..........................................................................Fr-4

Mémoire ..............................................................................................................Fr-5

Connecteurs d’Alimentation ................................................................................Fr-7

Panneau Arrière ..................................................................................................Fr-8

Connecteurs ........................................................................................................Fr-9

Cavaliers ...........................................................................................................Fr-14

Emplacements ..................................................................................................Fr-15

Réglage BIOS ...................................................................................................Fr-16

Information De Logiciel .....................................................................................Fr-24

Русский

....................................................................................................

Ru-

1

Характеристики ............................................................................................... Ru-2

Размещение компонентов системной платы ................................................ Ru-4

Память .............................................................................................................. Ru-5

Разъем питания ............................................................................................... Ru-7

Задняя панель ................................................................................................. Ru-8

Коннекторы ...................................................................................................... Ru-9

Перемычки ..................................................................................................... Ru-14

Слоты ............................................................................................................. Ru-15

Настройка BIOS ............................................................................................. Ru-16

Сведения о программном обеспечении ...................................................... Ru-24

En-6

▍

MS-7618 Mainboard

Installing Memory Modules

The memory module has only one notch on the center and will only fi t in the right

orientation.

Insert the memory module vertically into the DIMM slot. Then push it in until the

golden fi nger on the memory module is deeply inserted in the DIMM slot. The plastic

clip at each side of the DIMM slot will automatically close when the memory module

is properly seated.

Manually check if the memory module has been locked in place by the DIMM slot

clips at the sides.

Notch

Volt

1.

2.

3.

Important

You can barely see the golden fi nger if the memory module is properly inserted in the

DIMM slot.

English

En-7

POWER SUPPLY

ATX 24-pin Power Connector: JPWR1

This connector allows you to connect an ATX 24-pin power supply. To connect the ATX

24-pin power supply, make sure the plug of the power supply is inserted in the proper

orientation and the pins are aligned. Then push down the power supply fi rmly into the

connector.

You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin

ATX power supply, please plug your power supply along with pin 1 & pin 13.

13.+3.3

11.+12V

10.+12V

9.5VSB

8.PWR OK

7.Ground

6.+5V

5.Ground

4.+5V

3.Ground

2.+3.3V

1.+3.3V

24.Ground

23.+5V

22.+5V

21.+5V

20.Res

19.Ground

18.Ground

17.Ground

16.PS-ON#

15.Ground

14.-12V

2.+3.3V

ATX 4-pin Power Connector: JPWR2

This connector is used to provide the power output to the CPU.

4.+12

2.Ground

3.+12V

.Ground

Important

•

Make sure that all the connectors are connected to proper ATX power supplies to

ensure stable operation of the mainboard.

•

Power supply of 350 watts (and above) is highly recommended for system stability.

En-8

▍

MS-7618 Mainboard

BACK PANEL

Mouse/Keyboard

®

®

The standard PS/2

mouse/keyboard DIN connector is for a PS/2

mouse/keyboard.

Serial Port

The serial port is a 16550A high speed communications port that sends/ receives 16

bytes FIFOs. You can attach a serial mouse or other serial devices directly to the con-

nector.

VGA Port

The DB15-pin female connector is provided for monitor.

USB Port

The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard,

mouse, or other USB-compatible devices.

LAN

The standard RJ-45 LAN jack is for connection to

the Local Area Network (LAN). You can connect a

network cable to it.

LED

Color

LED State

Condition

Left Yellow Off LAN link is not established.

On(Steady state) LAN link is established.

On(brighter & pulsing) The computer is communicating with another computer on the LAN.

Right Green Off 10 Mbits/sec data rate is selected.

On 100 Mbits/sec data rate is selected.

Orange On 1000 Mbits/sec data rate is selected.

▶

▶

▶

▶

▶

▶

Audio Ports

These audio connectors are used for audio devices. It is easy to diff erentiate between

audio eff ects according to the color of audio jacks.

■

Line-In (Blue) - Line In is used for external CD player, tapeplayer or other audio

devices.

■

Line-Out (Green) - Line Out is a connector for speakers or headphones.

■

Mic (Pink) - Mic is a connector for microphones.

Mouse

Line-In

USB Port

Yellow Green/ Orange

Keyboard

VGA Port

LAN

USB Port

Serial Port

Line-Out

Mic

English

En-9

CONNECTORS

Serial ATA Connector: SATA1~2

This connector is a high-speed Serial ATA interface port. Each connector can connect

to one Serial ATA device.

F

l

o

p

p

y

D

M

S

I

F

l

o

p

p

y

D

M

S

I

K

d

k

l

d

k

d

d

f

k

k

k

a

s

f

k

k

s

d

k

d

k

f

k

k

a

d

a

d

d

d

f

d

f

d

d

-

k

l

f

d

f

d

d

k

d

a

f

d

d

f

d

d

d

j

a

s

d

d

j

d

f

f

f

a

d

k

d

a

s

d

d

d

f

f

d

f

d

f

f

d

s

a

s

d

d

f

d

d

d

a

d

a

s

d

d

a

s

d

a

s

s

d

d

f

a

a

s

d

d

a

d

d

s

d

d

d

f

d

f

s

d

f

a

s

a

d

f

f

s

f

f

d

f

a

s

d

f

f

f

d

f

F

l

o

p

p

y

D

M

S

I

K

d

k

l

k

d

d

d

f

k

k

k

f

k

k

s

d

k

k

s

d

k

a

d

k

k

d

a

f

d

f

a

d

f

d

d

f

d

f

-

d

l

d

f

d

d

d

d

k

f

d

d

a

s

d

j

d

j

d

f

d

k

a

d

s

d

f

a

d

d

f

f

a

d

f

f

d

d

f

f

d

a

s

d

f

d

d

d

a

s

d

d

a

s

d

d

a

s

d

a

s

s

d

d

f

a

a

s

d

d

d

a

s

d

d

d

d

f

s

d

f

a

s

a

d

f

d

f

f

s

f

f

d

a

f

s

d

f

f

f

d

f

Important

Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may

occur during transmission.

Chassis Intrusion Connector: JCI1

This connector connects to the chassis intrusion switch cable. If the chassis is opened,

the chassis intrusion mechanism will be activated. The system will record this status

and show a warning message on the screen. To clear the warning, you must enter the

BIOS utility and clear the record.

1

.

C

I

N

T

R

2

.

G

r

o

u

n

En-10

▍

MS-7618 Mainboard

Fan Power Connectors: SYSFAN1~2

The fan power connectors support system cooling fan with +12V. When connecting the

wire to the connectors, always note that the red wire is the positive and should be con-

nected to the +12V; the black wire is Ground and should be connected to GND. If the

mainboard has a System Hardware Monitor chipset on-board, you must use a specially

designed fan with speed sensor to take advantage of the CPU fan control.

1

2

.

G

3

.

+

r

.

S

1

o

2

u

e

V

n

n

d

s

o

Front Panel Connectors: JFP1

The connector is for electrical connection to the front panel switches and LEDs. The

®

JFP1 is compliant with Intel

Front Panel I/O Connectivity Design Guide.

10.NoPin

5.-

3.-

1.+

Reset Switc

HDD LE

Power Switch

Power LED

8.-

6.+

4.-

2.+

9.Reserved

7.+