BEST Vertigo Double: English
English: BEST Vertigo Double
English
! The appliance must be installed by a qualified person in
MAINTENANCE
GB
compliance with the instructions provided.
! Before cleaning or maintenance cut the power.
!
Wear gloves when carrying out installation and
Cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months to
maintenance operations.
prevent the risk of fire.
EXTERNAL CLEANING: use a cloth moistened in
lukewarm water and neutral detergent (for painted
Filtering version
hoods); use specific products for steel, copper or brass
The hood purifies the air and recycles the clean air back
hoods.
into the room. For this version, the following are required:
INTERNAL CLEANING: use a cloth (or brush) soaked in
1 charcoal filter.
denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosive
CONTROLS
products (e.g. metal sponges, brushes, too hard brushes,
very aggressive detergents, etc.)
Speed display
Cleaning the grease filters
WHEN TO CLEAN IT: clean it at least every 2 months to
PU1: ON/OFF Lights
st
prevent the risk of fire.
PU2: ON/OFF Motor 1
speed
nd
HOW TO REMOVE THE FILTERS: push the catch near
PU3: ON/OFF Motor 2
speed
rd
the handle towards the rear of the hood and pull the filter
PU4: ON/OFF Motor 3
speed
th
downwards
PU5: ON/OFF Motor 4
speed
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not
in any way compromise their functioning.
Replacing the charcoal filter (P)
(for filtering version only)
WHEN TO REPLACE IT: replace it at least every 6
months.
5’ timer function:
HOW TO REMOVE IT: position the charcoal filter inside
Pressing PU2, PU3 or PU4 for two seconds when the
the hood and fit the 2 filter clips (M)
motor is set to the corresponding speed, the 5’ timer
function is activated. The corresponding LED starts
blinking to display this function. After five minutes of
operation the motor is turned off. If you change the speed
while the timer is running, the function is NOT
deactivated. To deactivate the function, press the blinking
key for two seconds.
NOTE – the 5’ timer function can be activated for the
normal speeds only (1st, 2nd, 3rd)
Buzzer:
Each time the key is pressed, a beep is sounded.
Filter alarm:
After 30 hours of motor operation, the grease filter alarm
is activated (all the LEDs come on). The alarm is
activated when the motor is off and remains displayed for
30". To deactivate the alarm, press one of the keys for 2"
during alarm display. After 120 hours of motor operation,
the charcoal filter alarm is activated (all the LEDs blink).
The alarm is activated when the motor is off and remains
displayed for 30". To deactivate the alarm, press one of
the keys for 2" during alarm display.
12
Replacing the lamps
MALFUNCTIONS
- To change the halogen lamps open the cover levering
GB
If something appears not to be working properly, do the
from the proper slots. Replace it with a lamp of the
following simple checks before calling Technical Service:
same type.
• If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
• If the hood performs inefficiently:
Check that:
- The motor speed selected is sufficient for the amount
of smoke and vapours released.
- The kitchen is sufficiently ventilated to allow air intake.
- The charcoal filter is not worn (hood in filtering version).
• If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.
Components not provided with the product
13
