Scarlett SL-1501: GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS INSTRUCTION FOR USE CARE AND CLEANING BEFORE USING FOR THE FIRST TIME

IM010

GB INSTRUCTION MANUAL

• Remove all packing materials and sticker from the

IMPORTANT SAFEGUARDS

kettle.

• Please read these operating instructions carefully

• Fill the kettle with cool water up to the maximum

before connecting your kettle to the power supply

level mark and boil it. Empty the kettle. Repeat this

in order to avoid damage due to incorrect use.

operation. The appliance is ready for use.

• Before first switching on check that the voltage

INSTRUCTION FOR USE

indicated on the rating label corresponds to the

FILLING

mains voltage in your house.

• In order to fill the kettle with water take the kettle off

• Incorrect operation and improper handling can lead

its base, open the lid by pressing the lid opening

to malfunction of the appliance and injuries to the

button, pour in the water observing the water level

user.

scale.

• For home use only. Do not use for industrial

• In order to avoid overheating the kettle do not pour

purposes.

in more than 0.5 liters of water (below “MIN” mark).

• Always unplug the appliance from the power supply

Do not pour in more than 1.7 liters of water (above

when not in use.

“MAX” mark), otherwise the water may overflow

• Keep the base unit away from water and protect

through the nozzle when it starts boiling.

from splashes.

• Close the lid tightly.

• Do not immerse the unit, cord or plug in water or

TURN ON

other liquids. If it has happened, remove the plug

• Put the filled kettle onto the base; it is possible to

from the wall socket immediately, an expert should

put the kettle the way it is convenient for you since

check the unit before using it again.

the base allows for 360° rotation of the kettle.

• Do not operate the appliance if the cord or the plug

• Plug the power cord into the socket.

is damaged or if the appliance has been otherwise

• Press the start button

.

damaged. In such cases take the appliance to a

• All the buttons will go blinking red.

qualified specialist for check up and/or repair if

• Press the button with the required temperature

necessary.

(60°, 70°, 80°, 90° or 100°).

• If the power cord is damaged it should be replaced

• Recommended temperature for making:

by the manufacturer or authorized servicing center

• 60°- white tea

or qualified professional for safety reasons.

• 70°- red tea

• Ensure that the cord does not hang over sharp

• 80° - green tea

edges and keep it away from hot surfaces.

• 90° - oolong tea

• To disconnect appliance from the power supply pull

• 100°- black tea

it out by the plug only, not by the cord.

• The chosen button will be highlighted on the base.

• Place the appliance on a dry stable non-hot

• The button will stay highlighted until the water

surface, away from hot objects (e.g. hotplates); do

reaches the set temperature, then the indicator will

not place under curtains and shelves.

go out and the kettle will automatically switch off.

• You should never leave the appliance not

• Button lights on the base will turn on. The lights will

supervised during use.

stay on for 5 minutes, and then the lights will turn

• The oven should not be operated by persons

off.

(including children) with depressed physical,

• The lights show that the device is ready to operate.

sensory or mental abilities or by persons who do

KEEP WARM

not have the corresponding knowledge and

• This regime is used to maintain the water of

experience if these persons are not supervised or

needed temperature for 30 minutes.

instructed about the use of the oven by another

• Press one of the buttons for temperature heating

person responsible for their safety.

and select the needed temperature (60°, 70°, 80°or

• Children should be supervised and should not be

90°) (the button light will start blinking).

permitted to play with the oven.

• Press the heating button

(the heating button

• Use the kettle only with the base unit supplied, and

light will turn on), and the kettle will start heating he

do not use the base unit for any other purposes.

water.

• Never take the kettle off from its base unit while in

TURN OFF

operation. Switch the appliance off first.

• You may turn the kettle off by taking it off the base

• Close the lid properly before switching on.

or by pressing the button of the selected regime

Otherwise, the appliance will not switch off

again.

automatically and the hot water may overflow.

• ATTENTION: Your kettle is equipped with

• The kettle is for heating water only, not for any

overheating protection system. If there is too little

other purposes and liquids.

or no water in the kettle, it will turn off

• If the product has been exposed to temperatures

automatically. If this happens you have to wait for

below 0ºC for some time it should be kept at room

at least 10 minutes until the kettle cools off. Then

temperature for at least 2 hours before turning it

you may fill the kettle with water again.

on.

SUBSEQUENT TURN-ON

• The manufacturer reserves the right to introduce

• Wait 15-30 seconds after the kettle turns off; then

minor changes into the product design without prior

you may turn it on again to boil the water.

notice, unless such changes influence significantly

CARE AND CLEANING

the product safety, performance, and functions.

• Remove the plug from the socket and let the

BEFORE USING FOR THE FIRST TIME

appliance cool down completely.

• Open the lid and pour out the water.

4

www.scarlett-europe.com SL-1501