Scarlett SC-1221: GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS BEFORE USING FOR THE FIRST TIME INSTRUCTION FOR USE Mechanical Automatic Using the push button CARE AND CLEANING

IM010 

www.scarlett.ru

  

SC-1221 

4

GB    INSTRUCTION MANUAL 

IMPORTANT SAFEGUARDS 

•

  Please read these operating instructions carefully 

before connecting your kettle to the power supply, 

in order to avoid damage due to incorrect use. 

•

  Before the first switching on check that the voltage 

indicated on the rating label corresponds to the 

mains voltage in your house. 

•

  Incorrect operation and improper handling can lead 

to malfunction of the appliance and injuries to the 

user. 

•

  For home use only. Do not use for industrial 

purposes. 

•

  Always unplug the appliance from the power supply 

when not in use. 

•

  Do not immerse the unit, cord or plug in water or 

other liquids. If it has happened, remove the plug 

from the wall socket immediately and have the unit 

checked by an expert before using it again. 

•

  Do not operate the appliance if the cord or the plug 

is damaged or if the appliance has been otherwise 

damaged. In such cases take the appliance to a 

qualified specialist for check and repair if 

necessary. 

•

  Ensure that the cord does not hang over sharp 

edges and keep it away from hot surfaces. 

•

  To disconnect the appliance from the power supply 

pull it out by the plug only, not by the cord. 

•

  Place the appliance on a dry stable surface, away 

from sources of heat (e.g. hotplates); do not place 

it under curtains and shelves. 

•

  Do not leave the appliance unattended when in 

use. 

•

  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliances by a person responsible for their safety. 

•

  Children should be supervised to ensure that they 

do not play with the appliance. 

•

ATTENTION: 

Do not open the lid while water is 

boiling. 

•

  Close the lid properly before switching on. 

Otherwise, the appliance will not switch off 

automatically and the hot water may overflow. 

•

  The kettle is for heating water only, not for any 

other purposes and liquids. 

•

  Do not press the push button with your hand! 

•

  If the product has been exposed to temperatures 

below 0ºC for some time it should be kept at room 

temperature for at least 2 hours before turning it 

on.  

•

  The manufacturer reserves the right to introduce 

minor changes into the product design without prior 

notice, unless such changes influence significantly 

the product safety, performance, and functions. 

BEFORE USING FOR THE FIRST TIME 

•

  Remove all packing materials and stickers from the 

kettle. 

•

  Fill the thermo pot with cool water up to the 

maximum level mark and boil it. Empty the thermo 

pot. Repeat this operation. The appliance is ready 

for use.

INSTRUCTION FOR USE 

FILLING 

•

  Fill a thermo pot through a orifice in opened cover. 

Do not fill with less than 0.5 l of water to prevent 

the thermo pot from operating dry and do not fill 

more than 3.0 l (up to “FULL” mark)

SWITCHING ON 

•

  Place the thermo pot filled with water on a plane 

surface. 

•

  Connect the plug to the power supply. The 

appliance will begin to operate and boiling indicator 

will light. 

KEEP WARM FUNCTION 

•

  When the water is boiled thermo pot will 

automatically switch to keep warm function. The 

boiling light indicator will go off and keep warm light 

indicator will go on. 

•

NOTE: The appliance should not be used when empty or 

with less than 0.5 l of water. This may lead to a 

malfunction.

RE-BOIL FUNCTION 

•

  Keep warm function temperature is lower than boil 

temperature. In case of need thermo pot allows to 

boil warm water quickly. For that press the “Re-

boil” button. 

WATER POURING OPTIONS 

•

  There are three options for pouring water out of the 

device: 

Mechanical 

•

  This option is available even when the device is 

unplugged from the socket. 

•

  Place the cup under the water spout. 

•

  Press the mechanical water dispensing button 

several times. 

Automatic 

•

  This option is used when the device is plugged into 

the socket. 

•

  Place the cup under the water spout. 

•

  Press the automatic water dispensing button 

“POUR OUT”. 

Using the push button 

•

  This option is used when the device is plugged into 

the socket. 

•

  Place the cup under the water spout. 

•

  Using the cup press the push button (

do not press 

the push button with your hand!

) 

REFILL 

•

  To prevent the thermo pot from operating dry add 

water that its level in the appliance was not lower 

than mark "MIN". 

SWITCHING OFF 

•

  To switch off the appliance disconnect it from the 

power supply. 

CARE AND CLEANING 

•

  Open the lid and pour out the water through the 

orifice. 

•

  Always remove the plug from the socket and let the 

appliance cool down completely. 

•

  Clean the outside of the thermo pot with a soft 

damp cloth, then wipe with a dry cloth. Do not use 

any abrasive materials. 

•

  Remove scale regularly, using special descaling 

agents, available at the market, following given 

instructions. 

•

  Switch off and unplug the appliance; let it entirely 

cool.