Eizo FlexScan SX2761W: Connecting Cables

English

3

Connecting Cables

Attention

• When replacing the current monitor with a SX2461W/SX2761W monitor, be sure to change the PC

settings for resolution and vertical frequency to those which are available for the SX2461W/SX2761W

monitor referring to the resolution table (back of cover page) before connecting the PC.

NOTE

• When connecting two PCs to the monitor, refer to the User’s Manual on the EIZO LCD Utility Disk (CD-ROM).

Check that the monitor and the PC are powered off.

1

Connect the monitor to the PC with a signal cable that matches the connectors.

2

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

Digital connection

Connectors on

Connectors on

the PC

the monitor

Signal cable FD-C39 (supplied)

DVI connector

DVI-I connector

USB Upstream

USB Downstream

EIZO USB cable MD-C93 (supplied)*

Analog connection

Connectors on

Connectors on

the PC

the monitor

D-Sub mini 15-pin

Signal cable FD-C16 (supplied)

connector

DVI-I connector

USB Upstream

USB Downstream

EIZO USB cable MD-C93 (supplied)*

* Required when using the UniColor Pro software and the ScreenManager Pro for LCD software. (Refer to the

User’s Manual on the UniColor Pro (CD-ROM) or the EIZO LCD Utility Disk (CD-ROM).)

Plug the power cord into a power outlet and the Power connector on the monitor.

3