Indesit PWE 81472S: Description of the washing machine

Description of the washing machine: Indesit PWE 81472S

Description of the washing

machine

Control panel

GB

OPTION

buttons and

DOOR

ON/OFF

TEMPERATURE

indicator lights

LOCKED

button

button

indicator light

DISPLAY

DELAYED

WASH

SPIN

START

Detergent dispenser drawer

CYCLE

button

button

START/PAUSE

SELECTOR

button and indicator

KNOB

light

Detergent dispenser drawer: used to dispense

START/PAUSE button and indicator light: when the

detergents and washing additives ( see “Detergents and

blue indicator light flashes slowly, press the button to start

laundry”).

a wash cycle. Once the cycle has begun the indicator light

will remain lit in a fixed manner. To pause the wash cycle,

ON/OFF button: press this briefly to switch the

press the button again; the indicator light will flash in an

machine on or off. The START/PAUSE indicator light which

amber colour. If the symbol is not illuminated, the door

flashes slowly in a blue colour shows that the machine is

may be opened (wait approximately 3 minutes). To start

switched on. To switch off the washing machine during the

the wash cycle from the point at which it was interrupted,

wash cycle, press and hold the button for approximately 3

press the button again.

seconds; if the button is pressed briefly or accidentally the

machine will not switch off.

DOOR LOCKED indicator light:

If the machine is switched off during a wash cycle, this

The lit symbol indicates that the door is locked. To prevent

wash cycle will be cancelled.

any damage, wait until the symbol turns off before opening

the door (wait approximately 3 minutes).

WASH CYCLE SELECTOR KNOB: used to set the

To open the door while a cycle is in progress, press the

desired wash cycle (see “Table of programmes and wash

START/PAUSE button; if the DOOR LOCKED symbol is

cycles”).

switched off the door may be opened.

OPTION buttons and indicator lights: press to select the

Standby mode

available options. The indicator light corresponding to the

This washing machine, in compliance with new energy

selected option will remain lit.

saving regulations, is fitted with an automatic standby

system which is enabled after about 30 minutes if no

SPIN button: press to reduce or completely exclude

activity is detected. Press the ON-OFF button briefly and

the spin cycle; the value appears on the display.

wait for the machine to start up again.

TEMPERATURE button: press to reduce or

completely exclude the temperature; the value appears on

the display.

DELAYED START button: press to set a delayed start

for the selected wash cycle; the delay period appears on

the display.

4

Display

GB

B

A

C

The display is useful when programming the machine and provides a great deal of information.

The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the DELAYED

START option has been set, the countdown to the start of the selected wash cycle will appear.

Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the

machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle.

The hour-glass flashes while the machine is processing data, depending on the wash cycle and level selected. After

a maximum of 10 minutes, the “hour-glass” icon remains lit in a fixed manner and the final amount of time remaining is

displayed. The hour-glass icon will then switch off approximately 1 minute after the final amount of time remaining has

appeared.

The “wash cycle phases” corresponding to the selected wash cycle and the “wash cycle phase” of the running wash cycle

appear in section B:

Main wash

Rinse

Spin

Drain

The icons corresponding to “temperature”, “spin” and “delayed start” (working from the left) are displayed in section C.

The “temperature” bars indicate the maximum temperature level which may be selected for the set cycle.

The “spin” bars indicate the maximum spin level which may be selected for the set cycle.

The “delay” symbol , when lit, indicates that the set “delayed start” value has appeared on the display.

5

Оглавление