Hoover RUSH EXTRA TRE 420 019: gB USER cHEcKlISTIMPORTANT INfORMATION

3

gB USER cHEcKlIST IMPORTANT INfORMATION

Should you have a problem with the product, complete this simple user checklist before 

calling your local Hoover service.

Is  there  a  working  electricity  supply  to  the  cleaner?  Please  check  with  another  electrical 

• 

appliance

Is the dust container over-filled? Please refer to ‘cleaner Maintenance’.’

• 

Is the filter blocked? Please refer to ‘cleaner Maintenance’.’

• 

Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the system’.’

• 

Has  the  cleaner  overheated?  If  so,  it  will  take  approximately  30  minutes  to  automatically 

• 

reset.

hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover 

dealer or direct from Hoover. when ordering parts always quote your model number.

Consumables:

Hepa / foam filter pack: 

U64 35601223

• 

Spares:

carpet and floor Nozzle: 

G140 35601226

• 

flexible Hose: 

D132 35601224

• 

Stretch Hose: 

D133 35601225

• 

Grand Turbo Nozzle: 

J55 35601206

• 

Mini Turbo Nozzle: 

J56 35601227

• 

Parquet caresse Nozzle: 

G133Pc 35601205

• 

hoover Service

Should you require service at any time, please contact your local Hoover Service Office.

Cleaning the dust container / multi-cyclonic separation unit

This  cleaner  uses  a  multicyclonic  separation  system,  unique  to  Hoover.  If  necessary  the 

separation unit can be disassembled from the dust container and cleaned.

Release  the  dust  container  by  sliding  the  dust  container  release  button  towards  the 

1. 

rear of the cleaner. 

[13] 

lift the dust container from the cleaner main body.

Hold  the  dust  container  with  one  hand  and  with  the  other  hand  rotate  the  dust 

2. 

container handle anti clockwise to release it from the dust container.

 [15]

Remove  the  multicyclonic  separation  unit  from  the  dust  container  by  pulling  the 

3. 

handle provided. 

[20]

If necessary, use a cloth to remove excessive dust from the multi-cyclonic unit surface. 

4. 

[21]

Reassemble the multicyclonic separation unit to the dust container and refit the filter 

5. 

pack in position.

Reassemble the dust container handle to the bin container. Refit the dust container to 

6. 

the cleaner.

note: 

for stubborn dirt the multi-cyclonic separation unit, or the dust container

can be 

washed, but care must be taken to ensure that both are completely dry before use.

important:

 for optimum performance, we recommend that the multi-cyclonic separation 

system is inspected after each empty.

removing a Blockage From the System

check if the dust container is full. If so refer to ‘Emptying the dust container’.

1. 

If the dust container is empty but suction is still low: 

2. 

Do the filters need cleaning? If so refer to ‘cleaning the washable filters’.

A. 

check if there is any other blockage in the system - Use a rod or a pole to remove 

b. 

any blockage from the extension tube or flexible hose.

check if pre-motor filter is fitted.

c. 

check if the separation unit needs to be cleaned. Refer to ‘cleaning the separation 

D. 

unit’.

RushExtra__1-4_union.indd   3

22/07/2011   16.02.16