Eneo PXD-5360F01IR: DE

Step 3: Click the <Security> tab and select “Internet”, and click <Custom

level> to change ActiveX settings.

Step 4: Set “ActiveX controls and plug-ins” items to <Prompt> or

<Enable>.

Internet Security Level

Step 1: Start the IE.

DE

Step 2: Select <Tools> from the main menu of the browser.

EN

Then Click <Internet Options>.

Step 3: Click the <Security> tab and select “Internet.”

FR

Step 4: Down the page, press “Default Level” and click “OK” to confirm

the setting. Close the browser window, and open a new one later

PL

for accessing the IP Dome Camera

RU

Accessing the camera

The IP Dome Camera’s default IP address is: 192.168.1.10. Therefore, to

access the IP Dome Camera for the first time, set the PC’s IP address as:

192.168.1.XXX; for example:

IP Address: 192.168.1.20

Subnet Mask: 255.255.255.0

Login ID & Password

• Key in the IP Dome Camera’s IP address in the URL bar of the Web

browser window and press “Enter.”

• Enter the default user name (admin) and password (admin) in the

prompt request dialogue. Note that user name is case sensitive.

Install the ActiveX control

• After connecting to the IP Dome Camera, the request for installing

17

the ActiveX control will appear just below the URL bar.

• Right Click on the information bar, and press “Install ActiveX Con-

trol…” to permit ActiveX control installation.

• In the pop-up security warning window, click “Install” to start down-

loading DC Viewer software on the PC.

• Press “Finish” when DC Viewer installation is complete.

Browser-based viewer

The main page of the IP Camera user interface is as shown below. Please

note that the function buttons will vary depending on the camera model.

18