Lenovo IdeaPad S10 FR: инструкция

Lenovo OneKey Rescue System 6.0 V1.0  cover_en_2-3

First Edition (May 2008)

U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with 

RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule 

contract with Lenovo, if any, or the standard terms of this commercial license, or if the agency is unable to accept 

this Program under these terms, then we provide this Program under the provisions set forth in Commercial 

Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in Data-General, FAR 

52.227.14 (Alternate III).

© Copyright Lenovo 2008. All rights reserved.

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Contents

Introduction...................................................................................................... 1

Important Notes ...................................................................................................... 2

Lenovo.OneKey.Recovery.............................................................................. 3

Create Full Backup.................................................................................................. 4

Create Incremental Backup ................................................................................... 4

Create Recovery Disc ............................................................................................. 5

Restore of Factory Default ..................................................................................... 5

Restore from Backup .............................................................................................. 6

Using Recovery Discs ............................................................................................. 6

Back Up My Data .................................................................................................... 7

System Repair .......................................................................................................... 7

Set and Manage User Password ........................................................................... 7

Frequently.Asked.Questions.......................................................................... 8

Glossary .................................................................................................................... 9

Backing Up Your Data ......................................................................................... 10

Recovering Your Data .......................................................................................... 11

Using Recovery Disc(s) ........................................................................................ 13

Back Up My Data Feature .................................................................................... 13

Others ..................................................................................................................... 14

Lenovo OneKey Rescue System 6.0 1   1

2008/5/27   17:29:18

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Introduction

Lenovo

®

 OneKey Recovery is an easy-to-use application that can be used 

to back up the data on your system partition (C drive) and then easily 

restored when required. You can run Lenovo OneKey Recovery under both 

Windows and WinPE.

In Windows, you can create a backup of an entire system partition, saving 

it your local hard disk. You can back up your data to a CD, DVD, network 

drive or other removable disk. In addition, you can also create Windows 

recovery disc(s) to boot and recover your system.

If you need to recover your system, you can use OneKey Rescue System, 

which includes several applications to help you detect and remove 

viruses, and recover Windows system and data. You can press OneKey 

Rescue System key   to activate Lenovo OneKey Rescue when your PC is 

turned off. Within the program, you can restore your system partition to 

the original factory status or to a previously generated backup. You may 

also transfer critical data or documents to other storage devices. All these 

features make Lenovo OneKey Recovery an important utility to secure 

your data.

Lenovo OneKey Rescue System 6.0 1   1

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Important.Notes

In order to utilize the features of OneKey Recovery, your hard 

disk already includes a hidden partition by default to store a 

system mirror image file and OneKey Recovery program files. 

This default partition is hidden for security reasons and is the 

reason the available disk space is less than it claims. The exact 

available hard disk space depends on the file size of the mirror 

image file (based on the size of operating system and pre-

installed software.) 

You can use Restore to Factory Default feature to restore the 

system partition (C drive) back to the factory default, i.e. the 

state your computer was when you purchased it. However, 

once you restore to this status, you will not be able to restore 

the system to another previously backed up state. Therefore, 

make sure you back up your critical data on the system 

partition (C drive) to other media, such as a another disk 

partition, CD/DVD discs or removable storage devices. 

1.

2.

Lenovo OneKey Rescue System 6.0 2   2

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Lenovo.OneKey.Recovery

Lenovo OneKey Recovery is a utility that makes sure your system’s hard 

disk is safe. You can run initial backup or incremental backup manually, 

and then restore your system partition to a previous backup. 

Its features include:

See Create Full Backup 

See Create Incremental Backup 

See Create Recovery Disc 

See Restore of Factory Default 

See Restore from Backup 

See Using Recovery Discs 

See Back Up My Data 

See System Repair 

See Set and Manage User Password

•

•

•

•

•

•

•

•

•

Lenovo OneKey Rescue System 6.0 3   3

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Create.Full.Backup

There are two backup types that can be created: full backup and 

incremental backup. Selecting Full backup backs up your system 

partition to a folder on the hard disk in order to recover it in the 

future. The program will save the backed up data to the default 

location. For example to D:\Lenovo\OneKey App\OneKey 

Recovery. You may also select another destination, such as 

removable storage devices, network drives or a CD/DVD.

If you choose to back up system partition to a disc (CD/DVD), the 

created discs can be used to recover your system to the current status.

We suggest you do the following before you create recovery discs:

Use the latest version of your system’s anti-virus software to 

scan your computer and make sure it is virus-free. 

Optimize your system, including scanning and defragmenting 

your hard disk drive.

Create.Incremental.Backup

An incremental backup is a backup of your data based on 

previous backed up file located in the default path. This backup 

includes different data than the full backup, such as application 

variations and user data.

Incremental backup can only be saved to the default path; it 

cannot be backed up to another location.

•

•

Lenovo OneKey Rescue System 6.0 4   4

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Create.Recovery.Disc

You can burn the backup image to a CD/DVD as recovery 

discs. The recovery discs can be used to boot up your computer 

automatically and restore your system back to previously backed 

up status. If your hard disk fails and you are unable to use Lenovo 

OneKey Recovery on your computer, you can use these discs to 

recover your system on a reformatted hard drive.

Please make sure to create recovery discs, so that you can 

recover your system, even when replacing the hard drive.

After the recovery discs are burned, please number them so that 

you can use them in order.

When burning the recovery discs, please use good quality 

discs with to ensure the burning process and backed up data is 

complete and correct. 

Restore.of.Factory.Default

In order to save application files and the initial backed up files of the 

system, the hard disk in a Lenovo PC includes a hidden partition 

when it is shipped. If you need to restore the system to the point of 

your first boot up, just enter Lenovo OneKey Rescue System and 

run 

Restore to Factory Default

. This will delete all the new data on 

the system partition (C partition), which is not recoverable. Make 

sure to back up your critical data before you run this feature.

1.

2.

3.

Lenovo OneKey Rescue System 6.0 5   5

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Restore.from.Backup

If you want to recover the system to a previous status, you just 

need to enter Lenovo OneKey Rescue, and select 

Restore

 from 

User’s Backup. Select the appropriate image file or, if you have 

run incremental backup before, you can use the incremental file to 

restore your system.

The process above will remove all data on the current system 

partition (C partition), which is not recoverable. Please back up all 

important data before restoring to a previous backup.

Using.Recovery.Discs

When you replace a hard disk drive in your computer, you are 

unable to use the pre-installed Lenovo OneKey Recovery and 

OneKey Rescue. However, you can use the recovery discs that 

store your backed up data to restore your new hard drive to a 

previous backup status.

When you use the recovery discs to boot your computer, the 

system will enter system recovery user interface automatically. 

Please follow the prompt to insert the backup discs in order to 

complete the entire recovery process.

Lenovo OneKey Rescue System 6.0 6   6

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Back.Up.My.Data

Within the Lenovo OneKey Rescue System you can transfer your data 

from your computer’s hard disk to other devices, so you may easily 

find it if your Windows system ever encountered a critical failure.

System.Repair

When you use Lenovo OneKey Rescue System, the program 

detects whether Windows has been damaged. If the system kernel 

files are damaged, Lenovo OneKey Rescue System will prompt 

you to proceed with a system repair. The system will reboot after 

the repair process is complete. If there are no files damaged, 

Lenovo OneKey Rescue System starts normally.

System repair only works for system data files. Using this 

feature will not affect your own data

Set.and.Manage.User.Password

You can set up your user password within Lenovo OneKey 

Rescue System to ensure other users cannot use the system 

recovery or Back Up My Data functions.

By default, the user password within the Lenovo OneKey Rescue 

System is blank and it is recommended that you immediately set a 

new password to ensure your system is protected.

•

Lenovo OneKey Rescue System 6.0 7   7

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Frequently.Asked.Questions

This chapter contains a glossary of terms and outlines frequently asked 

questions about Lenovo OneKey Recovery.

The topics are:

See Glossary 

See Backing Up Your Data 

See Recovering Your Data 

See Using Recovery Disc(s) 

See Back Up My Data Feature 

See Others 

•

•

•

•

•

•

Lenovo OneKey Rescue System 6.0 8   8

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Glossary

Term

Definition

Restore 

to factory 

default

Restores the system partition (C drive) back to the 

factory initial status. However, once you do this, you 

will not be able to restore to a backed up state created 

after you began using your computer. Therefore, it is 

recommended that you back up your critical data on the 

system partition (C drive) before proceeding.

Full 

backup

A full backup is a backup of the entire system partition. 

You will need to perform a full back up before you can 

run incremental back up. The backed up data will be 

saved in the default location. You can also specify the 

location to another path.

Incremental 

backup

An incremental backup is a backup of your data based on 

previous backed up file, backing up only the new/different 

data. Incremental backup can save hard disk space and 

back up time. For ease of management, the incremental 

backup file can only be saved to the default location.

Create 

recovery 

disc

Burn the backed up system partition data to discs and 

create recoverable disc(s). This allows you to recover 

your current system status even if you replace your hard 

disk in the future.

Back up 

my data

Copies your data to other storage devices, such as a 

removable drive or a network server, so that you can 

retrieve the data easily under system failure.

Lenovo OneKey Rescue System 6.0 9   9

2008/5/27   17:29:19

En-0

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Backing.Up.Your.Data

1. Why can’t I run full back up? 

The possible causes are:

Case 1 

: you are not currently using a Windows operating 

system (XP/Vista). 

Case 2 

: there is not enough space to store the backed up data. 

You will need to free more hard disk space on your system 

partition (C drive). 

Case 3 

: if you are backing up your data to a CD/DVD, make 

sure you are using compatible burning devices. 

Case 4 

: if you are burning backed up files to CD/DVD, make 

sure the burning devices are compatible with the CD/DVD 

discs. 

2. Why can’t I run incremental back up? 

The possible causes are:

Case 1 

: you didn’t run full backup in the default path. Please 

make sure you ran full back up in this path before runing 

incremental backup. 

Case 2 

: you didn’t select the default path for incremental 

back up. Incremental backed up files can be only saved to the 

default path. Please do not specify a different location. 

Case 3 

: the free disk space for the default location is 

insufficient. Please free more space on that hard drive. 

•

•

•

•

•

•

•

Lenovo OneKey Rescue System 6.0 10   10

2008/5/27   17:29:19

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

3. What can I do if the back up process fails? 

If you can start the back up feature without a problem, but it fails 

during the back up process, please try the following steps:

Close other applications, then restart the backup process. 

Check if the destination media is damaged, try to select another 

path and then try again.

Recovering.Your.Data

1. When do I need to use the Restore to Factory Default feature? 

You can use this feature when your system fails or you need to 

re-install your operating system. This will restore your computer 

back to the initial status when you first booted up your computer 

after receiving it from the store. By doing this, the data on your 

system partition will be restored to the factory default. If there 

is critical data on your current partition, please back it up before 

you run this recovery feature.

2. Why can’t I use the Restore to Factory Default feature? 

If your system partition was modified, such as the partition size 

or the drive capacity of C was changed by another partition 

utility, you will not be able to use the Restore to Factory Default 

feature. Therefore, we suggest that you don’t change the size of 

that partition to make sure the Restore to Factory Default feature 

is workable under any circumstance.

1.

2.

Lenovo OneKey Rescue System 6.0 11   11

2008/5/27   17:29:20

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

3. What can I do if the recovery process fails? 

If you can start the recovery feature without a problem, but it fails 

during the recovery process, this may be caused by one of the 

following reasons:

The backed up files were damaged 

The disc(s) were physically damaged 

Other unknown issues 

In this case, please select other backed up files and try to recover 

them. If it still doesn’t work, you can use Restore to Factory 

Default feature to restore your system partition to factory default. 

Please note your data on system partition will be lost during this 

restore process.

4. Why can’t I find the backed up files during recovery process? 

In OneKey Rescue System, the disk partition structure is different 

from Windows system. Therefore you may not be able to find the 

backed up data in the Windows backup path. In this case, you can 

change to another disk partition and try to locate backed up data 

in the folders of other partitions, then continue to complete the 

recovery process.

•

•

•

Lenovo OneKey Rescue System 6.0 12   12

2008/5/27   17:29:20

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

Using.Recovery.Disc(s)

1. How can I create the recovery discs for my current system? 

You can use Create Full Backup feature in OneKey Recovery’s 

Backup section, then choose back up to discs.

2. Why can’t the recovery disc(s) recover the entire hard disk drive?

The recovery discs include the backed up files of the system 

partition (c partition), instead of the backed up files of entire hard 

disk drive. Therefore you can’t recover the entire hard disk with 

the recovery discs you created.

3. Why can’t I use the recovery disc(s)? 

When you create recovery discs, please use reliable discs, or 

the backed up data may be damaged. 

When you use the recovery discs, please follow the instructions 

to insert backup discs. 

Back.Up.My.Data.Feature

1. When do I need to use the Back Up My Data feature? 

When your system fails or is unable to boot up, you can use Back 

Up My Data feature to retrieve the data you need immediately 

from your PC.

•

•

Lenovo OneKey Rescue System 6.0 13   13

2008/5/27   17:29:20

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

English

Others

1. How do I access the Lenovo OneKey Rescue System?

You can press OneKey Rescue System key   to activate Lenovo 

OneKey Rescue when your PC is turned off. You cannot only 

use system recovery features, but also use other applications like 

system recovery, virus detection and cleaning to protect your 

computer.

2. Why can’t System Repair fix system partition data completely?

System Repair feature can only fix important system kernel files 

to ensure the system can boot up normally. It will not repair all 

data files.

3. Why does System Repair always prompt me that system kernel 

files need to be repaired when using OneKey Rescue System?

Please make sure you have installed Windows Vista SP1 or 

Windows XP SP2 on your system.

Lenovo OneKey Rescue System 6.0 14   14

2008/5/27   17:29:20

Lenovo OneKey Rescue System 6.0 15   15

2008/5/27   17:29:20

Cn-

中文简体

OneKey Rescue System 6.0 V1.0 CN 147001728

目录

软件简介............................................................

1

注意事项..........................................................

2

一键恢复............................................................

3

创建完整备份......................................................

4

创建增量备份......................................................

4

创建恢复光盘......................................................

5

恢复初始状态......................................................

5

恢复用户备份......................................................

6

使用恢复光盘......................................................

6

数据转移..........................................................

6

系统修复..........................................................

7

用户口令设置......................................................

7

常见问题解答........................................................

8

术语解释..........................................................

8

数据备份..........................................................

9

数据恢复.........................................................

10

使用恢复光盘(组).................................................

11

数据转移.........................................................

12

其他.............................................................

12

Lenovo OneKey Rescue System 6.0 1   1

2008/5/27   17:29:20

Cn-

OneKey Rescue System 6.0 V1.0 CN 147001728

软件简介

联想

®

“一键恢复”是一个简单易用的应用程序，能帮助您备份和恢复计算

机的系统分区（

C

分区）数据，该应用程序可以在

 Windows 

和联想“一键拯

救系统”中运行。

在

Windows

中，您可以创建整个系统分区的备份数据。这些备份数据默认存

放在本地硬盘，您也可以备份到

 CD

、

DVD 

光盘，或者网络、及其他附属硬

盘。此外，您还可以自己制作

Windows

的恢复光盘(组)，用于从光盘启动来

恢复系统。

如果您需要恢复系统数据，则需要借助“

OneKey Rescue System

”（下

称“一键拯救系统”）。该系统包含多个应用程序，能够帮助您完成病毒

查杀、

Windows

系统修复和数据恢复等功能。您可以在关机状态下，通过

按“一键拯救系统”键. .启动计算机，随后计算机将开机并进入“一键拯

救系统”。在这个系统中，您可以根据需要将系统分区恢复到出厂时的状

态，或者恢复到上一次您自定义备份的状态；此时，您还可以将急需的数据

文件转移到其他存储设备上。

所有这些特点使.联想“一键恢复”成为保证您数据安全的必要工具。

Lenovo OneKey Rescue System 6.0 1   1

2008/5/27   17:29:20