Saturn ST-EC0181: SAFETY IN USE PREPARATION FOR USE HOW TO USE MAINTENANCE & CARE HINTS & TIPS

2

GB

gentle beating and the high settings

("4" to MAX) for boiling.

COOKING PLATE

 Due to the cooking plates

construction, a certain amount of

Dear Buyer! We congratulate you on

residual heat will remain after switching

having bought the device under

off. This may be used to keep some

trade name “Saturn”. We are sure

foods warm for a short period (e.g. to

that our devices will become faithful

dry off rice or potatoes).

and reliable assistance in your

housekeeping.

SAFETY IN USE

 Choose a position convenient to an

Avoid extreme temperature

electrical socket but away from sources

changes. Rapid temperature change

of water.

(e.g. when the unit is moved from

 The work surface must be heat

freezing temperature to a warm

resistant, dry and approximately 75 cm

room) may cause condensation

high.

inside the unit and a malfunction

 A gap of at least 5 cm must be left

when it is switched on. In this case

around the sides of the appliance, since

leave the unit at room temperature

the sides of the appliance may become

for at least 1.5 hours before

hot during use.

switching it on.

 The mains cable must not be

If the unit has been in transit, leave

permitted to touch any part of the

it indoors for at least 1.5 hours

appliance and must be kept out of the

before starting operation.

reach of children.

 Do ensure this appliance is positioned

PREPARATION FOR USE

away from the edge of work surfaces

Read these instructions attentively

and out of the reach of children and

before using your cooking plate. First

people in sensitive to heat.

check that the voltage marked on the

 This appliance must not be positioned

product corresponds with your supply

beneath cupboards.

voltage. And the wall outlet is properly

 Do not attempt to move the appliance

grounded.

until completely cooled down nor whilst

pans are stood on plates.

 Ensure pans are situated centrally on

HOW TO USE

the cooking plates and pan handles are

 Select a suitable position close to an

safely positioned.

electric socket (refer to section “Safety

 Care must be taken when using oil or

in Use”).

fat for cooking. Do ensure overheating

 Having suitably positioned the

does not occur, by maintaining close

appliance, ensure the controls are in the

supervision at all times.

"0" position.

 Once the cooking is over, turn the

 When using the cooking plate for the

switch to "0" position.

first time, the invisible protective

 Ensure to unplug the cooking plate

coating may still not be removed. It

from the electrical socket after use.

may or may not have some smoke, but

 Do not leave the appliance unattended

it is normal reaction.

in the presence of children.

 Ensure there are no foreign articles

 Do not place the unit near the cloth

such as water or food on the heating

such as curtain in order to prevent fire.

element before switch on.

 The cooking plates are now ready for

MAINTENANCE & CARE

use.

 Before attempting any cleaning, first

ensure the plug is removed from the

HINTS & TIPS

mains socket.

 Always use flat-bottomed

 Do not immerse this appliance in

saucepans/containers which make good

water.

contact with the cooking plates. The

 All the surfaces may be cleaned simply

saucepan/containers bases should

by wiping over with a soft, damp cloth.

ideally be of a similar size to the

For hand stains, we recommend using a

cooking plates.

non-scratch cream cleanser. Do not use

 The cooking plates have a range of

harsh abrasive cleansers!

temperatures. Use the lower heat

 The steel surround to the cooking

settings ("0" to "3") for simmering and

plate may be cleaned using a metal

cleaning agent. For case of cleaning it is