Saturn ST-CC0215: IMPORTANT SAFEGUARDS Description SPRAYING STEAM IRONING
IMPORTANT SAFEGUARDS Description SPRAYING STEAM IRONING: Saturn ST-CC0215
Table of contents
- IMPORTANT SAFEGUARDS Description SPRAYING STEAM IRONING
- BURST OF STEAM CARE AND CLEANING DRY IRONING TO LET THE IRON HEAT UP AGAIN SELF CLEAN FUNCTION Specification HOW TO FILL IN WATER SETTING THE TEMPERATURE

2
3
GB
IMPORTANT SAFEGUARDS
1. Please read all instructions carefully
IRON
before using the appliance for the first
time.
Dear Buyer!
2. Before connecting the appliance,
We congratulate you on having
check if the voltage indicated on the
bought the device under trade name
rating plate corresponds with the mains
“Saturn”. We are sure that our
voltage in your home.
devices will become safe and
3. Do not use appliance for other than
reliable assistance in your
intended use.
housekeeping.
4. The iron should always be switched
off before connecting or disconnecting
Avoid extreme temperature
from the power supply. Do not pull on
changes. Rapid temperature change
the cord to disconnect the plug from the
(e.g. when the unit is moved from
wall socket.
freezing temperature to a warm
5. Do not use the iron when it is
room) may cause condensation
damaged in any way. Do not operate
inside the unit and a malfunction
the iron with a damaged cord or plug.
when it is switched on. In this case
Do not replace the power cord or any
leave the unit at room temperature
other parts by yourself-contact
for at least 1.5 hours before
Customer Support for Assistance.
switching it on.
6. The iron must not be left unattended
If the unit has been in transit, leave
while it’s connected to the supply mains.
it indoors for at least 1.5 hours
7. The iron must be removed from the
before starting operation.
socket outlet before the water reservoir
is filled with water (for steam irons
Description
incorporating means for spraying
1. Power cord
water).
2. Pilot light
8. The iron must be used and rested on
3. Transparent water tank
stable surface.
4. Housing
9. When placing the iron on it’s stand,
5. Soleplate
ensure that the surface on which the
6. Spray nozzle
stand is placed is stable.
7. Water inlet cover
10.The iron is not to be used if it has
8. Steam dial
been dropped, if there are visible signs
9. Spray button
of damage or if it’s leaking.
10.Burst of steam button
11.This appliance is not intended for
11.Temperature knob
use by persons (including children) with
12.Self clean button
reduces physical, sensory or mental
capabilities or lack of experience and
knowledge, unless they have been given
supervision or instruction. It is not
advised to use this appliance by children
under 14.
12.Children should be supervised to
ensure that they do not play with the
appliance.
SPRAYING
This function can be used any time and
it does not affect the ironing
temperature.
· Fill water into the iron.
· Aim the nozzle towards the garment.
· Press the spray button.
STEAM IRONING
This function can be used only at higher
ironing temperature.
• • for moderate steam
• • • or MAX for maximum steam
· Fill water into the iron.
· Stand the iron upright.




