Pyramida WH 20-60 v.1: REQUIREMENTS FOR SAFETY DURING INSTALLATION

REQUIREMENTS FOR SAFETY DURING INSTALLATION

It’s necessary to disconnect the

electrical network before installing the

product!

The minimum distance between

the hob and the bottom plane of hood

must be:

- for electric stoves – not less than

600 mm;

≥ 650 мм

- for gas stoves – not less than

650 mm.

If there is a furnace, gas boiler or

heating system in the room, keep in

mind that during the work hood takes

from the room air required for combustion. This also applies to

Using the air duct, consisting of several parts, each of the

rooms with sealed windows and doors.

following part should be located outside with respect to the

To ensure the safe operation of the hood in a confined space

previous one.

there should be an additional influx of air from the outside (an

open window in another room, an open door to the kitchen or a

In the case of equipment of hood with the electric cable

specially equipped forced ventilation).

without a plug you have to disconnect it from electricity and

make a connection to the network according to the following

scheme:

BROWN wire = L («live», «phase»)

BLUE wire = N («neutral», «zero»)

EN

30