Pyramida WH 20-60 v.1: CLEANING THE FILTER

CLEANING THE FILTER

Hood equipped with a removable protective grease filters.

Manual cleaning is done as follows:

Filters provide the absorption of particles suspended in

- remove the filter by pushing the lock filter;

air, so they can become contaminated, depending on the

- rinse with detergent or soap solution with a sponge or

frequency of use of the hood.

soft brush;

- thoroughly wash the filter with warm water;

In order to ensure maximum productivity and efficiency

- wait until completely dry filter;

of extraction is necessary to regularly clean the grease

- set a filter in the hood, by pushing the lock filter.

filters from contamination.

In the case of treatment using the dishwasher, make sure

Cleaning is performed every 5-6 weeks by hand in warm

that in the used vehicle does not include detergents aggressive

soapy water without a strong mechanical impact or in the

substances which can damage the surface of aluminum parts

dishwasher.

filter. In a dishwasher place the filters vertically to avoid hitting

them food scraps.

Increased frequency of cleaning

grease filters hinders the absorption of

Before installing a filter in the hood after cleaning in the

exhaust air. This increases the load on

dishwasher, make sure that the filter is dry. Failure to follow

the motor and can affect the life of the hood.

these rules, filter can be spoiled!

EN

34