Pyramida KH 60 v.2: PRODUCT MAINTENANCE BACKLIGHTS REPLACEMENT

PRODUCT MAINTENANCE

The works on maintenance should be performed on

- Wipe the external surfaces of the cooking hood with the

cooking hood with the purpose of maximal performance and

humid, good squeezed flannel tissue.

effectiveness of its operation during the life time.

- Use special fluids creating the protective film for handling

the surfaces made of stainless steel.

The cooking hood should be discon-

- Do not use the abrasive agents and solvents.

nected from the power network at

- Verify the conditions of the air duct of cooking hood and

works connected to the maintenance

ventilation channel, clean them at necessity!

on cooking hood.

Carbon filters can be purchased in retail

Regularly perform following actions at maintenance:

outlets or authorized service centers.

- Regularly remove all food debris and fat from the lower

surface of the cooking hood and from aluminum fat

filters. An excessive fatness can lead to fire!

BACKLIGHTS REPLACEMENT

In the extractor fan lighting lamps of type Е14 are used,

- press the filter lock and take off the fat filter;

their power is not more that 40 W. Replacement of lamps is

- Unscrew an old lamp from the holder and screw the new

made in the following order:

one;

- Make sure that cooking hood is disconnected from power

- press the filter lock and install the fat filter into the cooking

network before lamps replacement; wait until lamps will

hood.

cool down.

E14 40Вт

33