Lenovo IDEAPAD S12: 3. What can I do if the back up process fails? Recovering.Your.Data 1. When do I need to use the Restore to Factory Default feature? 2. Why can’t I use the Restore to Factory Default feature?

En-

OneKey Rescue System 6.0 V1.0 EN 147001728

3. What can I do if the back up process fails? 

If you can start the back up feature without a problem, but it fails 

during the back up process, please try the following steps:

Close other applications, then restart the backup process. 

Check if the destination media is damaged, try to select another 

path and then try again.

Recovering.Your.Data

1. When do I need to use the Restore to Factory Default feature? 

You can use this feature when your system fails or you need to 

re-install your operating system. This will restore your computer 

back to the initial status when you first booted up your computer 

after receiving it from the store. By doing this, the data on your 

system partition will be restored to the factory default. If there 

is critical data on your current partition, please back it up before 

you run this recovery feature.

2. Why can’t I use the Restore to Factory Default feature? 

If your system partition was modified, such as the partition size 

or the drive capacity of C was changed by another partition 

utility, you will not be able to use the Restore to Factory Default 

feature. Therefore, we suggest that you don’t change the size of 

that partition to make sure the Restore to Factory Default feature 

is workable under any circumstance.

1.

2.

Lenovo OneKey Rescue System 6.0 11   11

2008/5/27   17:29:20