Epson AcuLaser CX37DNF: Finding the place for the printer Epson AcuLaser CX37 Series Safety Information Guide
Finding the place for the printer Epson AcuLaser CX37 Series Safety Information Guide: Epson AcuLaser CX37DNF
Table of contents
- Safety Instructions Warning, Caution, and Note Important Safety Instructions Epson AcuLaser CX37 Series Safety Information Guide
- Epson AcuLaser CX37 Series Safety Information Guide
- Finding the place for the printer Epson AcuLaser CX37 Series Safety Information Guide
- Using the printer Epson AcuLaser CX37 Series Safety Information Guide
- Handling the consumables Epson AcuLaser CX37 Series Safety Information Guide
- Safety Information Laser safety labels
- Internal laser radiation Ozone safety Printer location
- Standards and approvals European model:
❏
Connect your printer to an electrical outlet that meets the power requirements of this printer.
Your printer’s power requirements are indicated on a label attached to the printer. If you are not
sure of the power supply specifications in your area, contact your local power company or consult
your dealer.
❏
If you use an extension cord, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
❏
When connecting this product to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
❏
When you use optional paper cassette unit, be sure to install the positioning pins correctly. For
instructions on how to install the positioning pins, refer to the Printer/Copier/Scanner User’s
Guide.
Finding the place for the printer
❏
Place the printer near an electrical outlet where you can easily plug in and unplug the power cord.
❏
Do not put your printer where the cord will be stepped on.
❏
Do not use printer in a damp environment.
❏
Avoid locations that are subject to direct sunlight, excessive heat, moisture, oil vapor, or dust.
❏
Do not place the printer on an unstable surface.
❏
Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not
block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface or in a
built-in installation unless proper ventilation is provided.
❏
Keep the entire computer and printer system away from potential sources of interference, such as
loudspeakers or the base units of cordless telephones.
❏
Leave adequate room around the printer to allow for sufficient ventilation.
Epson AcuLaser CX37 Series Safety Information Guide
Safety Instructions
4
