Saturn ST-EC1160: Safety In Use Preparation for Use How to Use Hints & Tips Maintenance & Care

GB

 Due to the cooking plates

COOKING PLATE

construction, a certain amount of

residual heat will remain after

Dear Buyer! We congratulate you on

switching off. This may be used to

having bought the device under

keep some foods warm for a short

trade name “Saturn”. We are sure

period (e.g. to dry off rice or

that our devices will become faithful

potatoes).

and reliable assistance in your

housekeeping.

Safety In Use

 Choose a position convenient to an

Avoid extreme temperature

electrical socket but away from

changes. Rapid temperature change

sources of water.

(e.g. when the unit is moved from

 The work surface must be heat

freezing temperature to a warm

resistant, dry and approximately 75

room) may cause condensation

cm high.

insid e the unit and a malfunct ion

 A gap of at least 5 cm must be left

when it is switched on. In this case

around the sides of the appliance,

leave the unit at room temperature

since the sides of the appliance may

for at least 1.5 hours before

become hot during use.

switching it on.

 The mains cable must not be

If the unit has been in transit, leave

permitted to touch any part of the

it indoors for at least 1.5 hours

appliance and must be kept out of

before starting operation.

the reach of children.

 Do ensure this appliance is

Read these instructions attentively

positioned away from the edge of

before using your cooking plate.

work surfaces and out of the reach

of children and people in sensitive

Preparation for Use

to heat.

First check that the voltage marked on

 This appliance must not be

the product corresponds with your

positioned beneath cupboards.

supply voltage. And the wall outlet is

 Do not attempt to move the

properly grounded.

appliance until completely cooled

down nor whilst pans are stood on

How to Use

plates.

 Select a suitable position close to

 Ensure pans are situated centrally

an electric socket (refer to section

on the cooking plates and pan

“Safety in Use”).

handles are safely positioned.

 Having suitably positioned the

 Care must be taken when using oil

appliance, ensure the controls are

or fat for cooking. Do ensure

in the "0" position.

overheating does not occur, by

 When using the cooking plate for

maintaining close supervision at all

the first time, the invisible

times.

protective coating may still not be

 Once the cooking is over, turn the

removed. It may or may not have

switch to "0" position.

some smoke, but it is normal

 Ensure to unplug the cooking plate

reaction.

from the electrical socket after use.

 Ensure there are no foreign articles

 Do not leave the appliance

such as water or food on the

unattended in the presence of

heating element before switch on.

children.

 The cooking plates are now ready

 Do not place the unit near the cloth

for use.

such as curtain in order to prevent

fire.

Hints & Tips

 Always use flat-bottomed

Maintenance & Care

saucepans/containers which make

 Before attempting any cleaning,

good contact with the cooking

first ensure the plug is removed

plates. The saucepan/containers

from the mains socket.

bases should ideally be of a similar

 Do not immerse this appliance in

size to the cooking plates.

water.

 The cooking plates have a range of

 All the surfaces may be cleaned

temperatures. Use the lower heat

simply by wiping over with a soft,

settings ("0" to "3") for simmering

damp cloth. For hand stains, we

and gentle beating and the high

recommend using a non-scratch

settings ("4" to MAX) for boiling.

cream cleanser. Do not use harsh

abrasive cleansers!