Saturn ST-EC0180: SAFETY IN USE PREPARATION FOR USE MAINTENANCE & CARE HINTS & TIPS
SAFETY IN USE PREPARATION FOR USE MAINTENANCE & CARE HINTS & TIPS: Saturn ST-EC0180
Table of contents
- SAFETY IN USE PREPARATION FOR USE MAINTENANCE & CARE HINTS & TIPS
- TECHNICAL DATA SET

2
3
GB
period (e.g. to dry off rice or
potatoes).
COOKING PLATE
SAFETY IN USE
Dear Buyer! We congratulate you
· Choose a position convenient to an
on having bought the device
electrical socket but away from
under trade name “Saturn”. We
sources of water.
are sure that our devices will
· The work surface must be heat
become faithful and reliable
resistant, dry and approximately 75
assistance in your housekeeping.
cm high.
· A gap of at least 5 cm must be left
Avoid extreme temperature
around the sides of the appliance,
changes. Rapid temperature
since the sides of the appliance may
change (e.g. when the unit is
become hot during use.
moved from freezing
· The mains cable must not be
temperature to a warm room)
permitted to touch any part of the
may cause condensation inside
appliance and must be kept out of
the unit and a malfunction when
the reach of children.
it is switched on. In this case
· Do ensure this appliance is
leave the unit at room
positioned away from the edge of
temperature for at least 1.5
work surfaces and out of the reach
hours before switching it on.
of children and people in sensitive to
If the unit has been in transit,
heat.
leave it indoors for at least 1.5
· This appliance must not be
hours before starting operation.
positioned beneath cupboards.
· Do not attempt to move the
PREPARATION FOR USE
appliance until completely cooled
Read these instructions attentively
down nor whilst pans are stood on
before using your cooking plate.
plates.
First check that the voltage marked
· Ensure pans are situated centrally
on the product corresponds with
on the cooking plates and pan
your supply voltage. And the wall
handles are safely positioned.
outlet is properly grounded.
· Care must be taken when using oil
or fat for cooking. Do ensure
HOW TO USE
overheating does not occur, by
· Select a suitable position close to
maintaining close supervision at all
an electric socket (refer to section
times.
“Safety in Use”).
· Once the cooking is over, turn the
· Having suitably positioned the
switch to "0" position.
appliance, ensure the controls are in
· Ensure to unplug the cooking plate
the "0" position.
from the electrical socket after use.
· When using the cooking plate for
· Do not leave the appliance
the first time, the invisible protective
unattended in the presence of
coating may still not be removed. It
children.
may or may not have some smoke,
· Do not place the unit near the
but it is normal reaction.
cloth such as curtain in order to
· Ensure there are no foreign articles
prevent fire.
such as water or food on the heating
element before switch on.
MAINTENANCE & CARE
· The cooking plates are now ready
· Before attempting any cleaning,
for use.
first ensure the plug is removed
from the mains socket.
HINTS & TIPS
· Do not immerse this appliance in
· Always use flat-bottomed
water.
saucepans/containers which make
· All the surfaces may be cleaned
good contact with the cooking
simply by wiping over with a soft,
plates. The saucepan/containers
damp cloth. For hand stains, we
bases should ideally be of a similar
recommend using a non-scratch
size to the cooking plates.
cream cleanser. Do not use harsh
· The cooking plates have a range of
abrasive cleansers!
temperatures. Use the lower heat
· The steel surround to the cooking
settings ("0" to "3") for simmering
plate may be cleaned using a metal
and gentle beating and the high
cleaning agent. For case of cleaning
settings ("4" to MAX) for boiling.
it is recommended that food spillage
· Due to the cooking plates
be removed with a damp cloth while
construction, a certain amount of
the cooking plate is still warm, but
residual heat will remain after
not hot. Take care not to burn
switching off. This may be used to
yourself when cleaning!
keep some foods warm for a short




