Pyramida R 90: PRODUCT MAINTENANCE BACKLIGHTS REPLACEMENT

PRODUCT MAINTENANCE

The works on maintenance should be performed on

- Regularly remove all food debris and fat from the lower

cooking hood with the purpose of maximal performance and

surface of the cooking hood and from aluminum fat

effectiveness of its operation during the life time.

filters. An excessive fatness can lead to fire!

- Wipe the external surfaces of the cooking hood with the

The cooking hood should be discon-

humid, good squeezed flannel tissue.

nected from the power network at

- Use special fluids creating the protective film for handling

works connected to the maintenance

the surfaces made of stainless steel.

on cooking hood.

- Do not use the abrasive agents and solvents.

- Verify the conditions of the air duct of cooking hood and

Regularly perform following actions at maintenance:

ventilation channel, clean them at necessity!

BACKLIGHTS REPLACEMENT

In the extractor fan lighting lamps of type Е14 are used,

- press the filter lock and take off the fat filter;

their power is not more that 40 W. Replacement of lamps is

- Unscrew an old lamp from the holder and screw the new

made in the following order:

one;

- Make sure that cooking hood is disconnected from power

- press the filter lock and install the fat filter into the cooking

network before lamps replacement; wait until lamps will

hood.

cool down.

E14 40Вт

33