Pyramida KH 60 Rustico v.2: FILTER CLEANING
FILTER CLEANING: Pyramida KH 60 Rustico v.2
Table of contents
WARRANTY
The product complies with the requirements of
Claims won’t be considered without warranty certificate
technical regulations: EMC equipment DSTU
with the date of sale and stamp of commercial organization.
CISPR 14-1:2004, DSTU CISPR 14-2:2007,
At purchasing of the product press for warranty certificate
IEC 61000-3-2:2004 DSTU DSTU EN 61000-
correct filling in.
3-3:2004; safety of low voltage electrical
equipment DSTU IEC 60335-2-31:2006.
Warranty service is not performed in the following cases:
- by failure to comply with rules stated in the manual;
Manufacturer guarantees normal operation of the product
- by reduction of the air duct diameter to less than
during 24 months since the day of sale through retail
120 mm;
distribution network on condition that transport, storing,
- by presence of obstacles to free air circulation from the
mounting and exploitation regulations, stated in present
extractor fan to air channel exit;
manual, are fulfilled. If your extractor fan does not work in
- by incorrect assembly, in case of opening or wiring pod, by
a proper way, call service center, maintaining TM Pyramida
replacement of the network cable;
products, and do not forget to report the following information:
- by supply network contradiction to the parameters set by
- number of warranty policy;
the manufacturer;
- product model;
- by mechanical or other damages of the device as a result
- serial number, stated on information label of the fan or in
of rough handling;
the warranty certificate;
- by installation of the fan lower that in 60 cm from burners
- failure description.
and heaters.
35
FILTER CLEANING
Extractor fan is equipped with removable protective fat
Manual cleaning is carried out in the following order:
filters. Filters guarantee absorption of suspended solids,
- remove the filter, having pressed the filter lock beforehand;
that’s why they can become dirty depending on frequency of
- wash the filter with cleaning agent or suds with the help
fan use.
of sponge or dauber;
- thoroughly wash the filter with warm water;
To guarantee maximum capacity and efficiency of fan work, it
- wait until the filter is absolutely dry;
is necessary to regularly clean fat filters from contaminations.
- set the filter into the extractor fan, having pressed the
filter lock beforehand.
Cleaning is carried out each 5-6 weeks by hand with suds
In case of cleaning with a dishwashing machine make sure
without strong mechanical effect or in dishwashing machine.
that the cleaning agents you use with your machine do not
contain deleterious substances that may damage the surface
of aluminum filter details. In the dishwashing machine, place
Cleaning of fat filters periodicity increase
filters vertically to avoid food remains getting in. Before
complicates air absorption by the fan.
installation of the filter into the fan after washing in the
This leads to engine load increment and
dishwashing machine make sure that the filter is dry. In case
may influence extractor fan life time.
of failure to comply present roles the filter may be damaged!
EN
34
