Pyramida GH 20-60 slim v.1: CONTROL PANEL RECIRCULATION MODE

CONTROL PANEL

1. To turn on or turn off the

Do not forget to include the hood as soon as you start to use

backlight.

the oven or hob. It is necessary for proper ventilation kitchen.

2. To turn off the fan.

3. To turn on low speed of the

fan

For a complete ventilation, turn off ventilation hood is not

4. To turn on average speed of

earlier than 15 minutes after the cooking process.

the fan

5. To turn on high speed of the

1 2 43 5

Hood is equipped with front panel control, which is a series

fan

of buttons. By buttons «•», «• •», «• • •» the gear shifting.

High speed is intended to remove from the premises of

a large amount of steam, and the mixed smell of cooking,

When heating food enough work hood on low speed. For

working simultaneously all the burners.

standard conditions of preparation (cooking and frying for

Switching speed buttons can be performed in any order.

1-2 burners) used average speed.

To turn off the fan, use the button «0».

RECIRCULATION MODE

When working in recycle mode exhaust clean air back into

Carbon filters can not be cleaned and replaced with new

the kitchen.

every 3-4 months.

In hood Pyramida WH 10-50, WH 20-60, GH 20-60 slim

To switch from ventilation to recirculation mode to air:

sets a carbon filter. In the hood Pyramida WH 22-60 – two

- Redirect the air flow inside the hood of the duct to the

filters.

shutters on the upper surface of the hood.

Switching the direction of airflow implemented effected

by the switching regulator of damper on the fan housing.

To access the regulator must remove the fat filters.

- Install a carbon filter in hood. Carbon filter is not supplied

and sold separately.

Regime of recirculation

Regime of ventilation

31