Pyramida GH 20-60 slim v.1: CLEANING THE FILTER
CLEANING THE FILTER: Pyramida GH 20-60 slim v.1
Table of contents
- GUIDANCE ON EXPLOITATION EN
- DESCRIPTION
- THE DESIGN OF THE HOOD
- REQUIREMENTS OF SAFETY DURING EXPLOITATION
- IS STRICTLY PROHIBITED!
- REQUIREMENTS FOR SAFETY DURING INSTALLATION
- CONTROL PANEL RECIRCULATION MODE
- INSTALLATION HOOD ON THE WALL
- MAINTENANCE PRODUCTS CHANGING THE LIGHT BULB
- CLEANING THE FILTER
- WARRANTY

CLEANING THE FILTER
Hood equipped with a removable protective grease filters.
Manual cleaning is done as follows:
Filters provide the absorption of particles suspended in
- remove the filter by pushing the lock filter;
air, so they can become contaminated, depending on the
- rinse with detergent or soap solution with a sponge or
frequency of use of the hood.
soft brush;
- thoroughly wash the filter with warm water;
In order to ensure maximum productivity and efficiency
- wait until completely dry filter;
of extraction is necessary to regularly clean the grease
- set a filter in the hood, by pushing the lock filter.
filters from contamination.
In the case of treatment using the dishwasher, make sure
Cleaning is performed every 5-6 weeks by hand in warm
that in the used vehicle does not include detergents aggressive
soapy water without a strong mechanical impact or in the
substances which can damage the surface of aluminum parts
dishwasher.
filter. In a dishwasher place the filters vertically to avoid hitting
them food scraps.
Increased frequency of cleaning
grease filters hinders the absorption of
Before installing a filter in the hood after cleaning in the
exhaust air. This increases the load on
dishwasher, make sure that the filter is dry. Failure to follow
the motor and can affect the life of the hood.
these rules, filter can be spoiled!
EN
34

