Maxwell MW-3011 G: ENGLISH

ENGLISH

• Put the iron on the base (8).

• Open the water tank lid (2), turn over the

• Insert the power plug into the outlet.

iron and drain any remaining water from

• Set the temperature regulator (11) to the

the water tank (10).

MAX. temperature

: “•••” the (9) indica-

• Close the lid (2).

tor will light up.

• Set the iron vertically and allow it to cool

• When the sole temperature (13) reaches

completely.

the desired temperature value, the (9) in-

• Store the iron vertically.

dicator will go out, you can start cleaning

of the iron chamber.

TECHNICAL CHARACTERISTICS

• Unplug the iron, set the temperature reg-

Power requirements: 220V -240V~ 50 Hz

ulator (11) to the «MIN» position.

Power consumption: 1450-1750 W

• Pull the plug out of the socket.

• Hold the iron above the sink horizontal-

Specifications subject to change without

ly, set and hold the regulator (3) to the

prior notice.

bumping.

• Boiling water together with scale will be

Service life of appliance - 3 years.

throwing out from the openings in the

iron sole (13).

GUARANTEE

• Slightly sway the iron back and forth, un-

Details regarding guarantee conditions can

til water goes out of the water tank (11).

• Place the iron on the base (8) and let it

be obtained from the dealer from whom

cool down completely.

the appliance was purchased. The bill of

• When the sole (13) cools down com-

sale or receipt must be produced when

pletely, wipe it with a dry cloth.

making any claim under the terms of this

• Before you take the iron for storing,

guarantee.

make sure that there is no water in the

water tank (10) and that the iron sole (13)

This product conforms to the

is completely dry.

EMC-Requirements as laid down

by the Council Directive 89/336/

CARE AND CLEANING

EEC and to the Law Voltage

• Before cleaning the iron, make sure that

Regulation (73/23 EEC)

it is turned off and has cooled complete-

ly.

• Wipe the iron’s outer surface with a damp

cloth and then wipe dry.

• Sediment on the iron sole can be re-

moved with a cloth soaked in vinegar-

water solution.

• After removing sediment, polish the sole

with a dry cloth.

• Do not use abrasive substances to clean

the sole and body of the iron.

• Avoid touching the iron sole with sharp

metal objects.

STORAGE

• Turn the temperature regulator (11) anti-

clockwise till MIN position, set the steam

release regulator (3) to the steam OFF

position.

• Remove the power plug from the outlet.

11

MW-3011.indd 11MW-3011.indd 11 11.02.2010 16:27:1411.02.2010 16:27:14