Changhong MRF-410: PRACTICAL TIPS

26

EN

Troubleshooting recommendations

• Read the following information on 

how different errors are displayed.

• In case of multiple errors that re-

quire concurrently displaying codes 

Е0

 and 

Е1

, the display will show 

Е2

.

№

Malfunction 

Type

Displayer Showing

1

Malfunction on 

the sensor of re-

frigeration room

Showing: «E0» in the 

«temperature of refrigera-

tion room setting» zone

2

Malfunction on 

the sensor of 

freezer room

howing: «E0» in the «tem-

perature of freezer room 

setting» zone

3

Malfunction on 

the sensor of 

evaporator in 

refrigerator

Showing: «Е1» in the 

«temperature of refrigera-

tion room setting» zone

4

Malfunction on 

the sensor of 

evaporator in 

freezer

Showing: «Е1» in the 

«temperature of freezer 

room setting» zone

5

Malfunction on 

the sensor of 

environment 

temperature

N/A

6

Malfunction on 

the communica-

tion

Showing: «ЕС» in the 

«temperature of freezer 

room setting» zone

PRACTICAL TIPS

Switching off the refrigerator

• Remove the plug from the socket. 

Remove the ice tray and products 

from the refrigerator.

• Leave the door cracked open to en-

sure air circulation inside the refrig-

erator and dry both compartments. 

• After switching off the refrigera-

tor, wait at least 10 minutes before 

switching it on again.

• If you are going to switch off the re-

frigerator for a long time, you need 

to disconnect it from the mains and 

thoroughly clean it. Do not forget to 

leave the door slightly ajar; store the 

refrigerator in a well-ventilated area 

to prevent unpleasant odours.